Benefect's Impact Cleaner is a high-performance Carpet Cleaner Concentrate based on optimized dynamic chemistry that outperforms other industry cleaners without using hazardous synthetic chemicals.
Formulated for:
- Carpets & Fabrics
- Plus other porous & semi-porous materials & surfaces
It can be used as a Carpet Pre-Spray, In-Tank Extraction Units, Bonnet Cleaning & for Upholstery Cleaning.
Features:
- Botanical
Ingredients
- CRI
Seal of Approval!
- Phosphate-Free
- No
VOCs
- No Fragrances, Dyes, Phosphates, EDTA, NTA,
alkyl/nonyl phenolethoxylates or other hazardous or unnecessary ingredients.
Made from botanically-based
ingredients, it is readily biodegradable & safe to use around children,
pets & the chemically- sensitive. The Carpet & Rug Institute sets test
methods & performance criteria for carpet cleaning products. Their Seal of
Approval means that Impact has passed stringent test for:
- Efficacy:
the ability to remove stains
- Resoiling:
whether the product attracts soil at an accelerated rate
- pH:
excessively acid or alkaline products can affect dyes and fibers
- Optical
Brighteners: can adversely affect color, appearance and performance
- Colorfastness
to light: residues on pile yarn can accelerate color change
You will not believe the
impact it has on your carpets & to your customers:
- High
Visually-Clean Impact
- Low
Environmental Impact
You will not be disappointed
when you try it! Impact Cleaner Use Instructions
To Use as a Carpet Pre-Spray with Hot Water Extraction:
- 1.
Mix 6 ounces (180ml) of Impact with 1 gallon (3.78L) of hot water. Apply
to carpet with a pump style sprayer. Light agitation of carpet with a
carpet brush will increase cleaning efficiency. Let sit for 5 minutes
before extracting.
- 2.
Fill the extraction machine's reservoir with hot tap water.
- 3.
Maximize the amount of water removed from the carpet by making a
water-extraction pass with the water spray on & then again with the
spray off & the vacuum on. Test the carpet with your hand. If your
hand comes away with water droplets, extract again with the spray off. If
your hand comes away damp & the carpet feels wrung out you have
extracted correctly.
- 4. Wait overnight for the carpet to dry before walking
on it. To dry thoroughly, open windows &
- use
fans.
- 5.
Once the carpet is completely dry, vacuum thoroughly.
To Use as an In-Tank Carpet
Extraction Cleaner:
- 1.
Mix 3 ounces (90ml) of Impact with 1 gallon (3.78L) of hot water.
- 2.
Fill the extraction machine’s reservoir with Impact and the hot tap water.
- 3.
Apply the cleaner by moving the wand over the carpet with the water spray
on and the vacuum on. Let the water/cleaner sit on the carpet for 5
minutes before extracting.
- 5.
Remove the cleaner by passing the extraction wand over the carpet with the
sprayer off and the vacuum on. Test the carpet with your hand. If your
hand comes away with water droplets, extract again with the sprayer off
and the vacuum on, if your hand comes away damp and the carpet feels wrung
out, you have extracted correctly.
- 6. Wait overnight for the carpet to dry before walking
on it. To dry thoroughly, open windows and use fans. 7. Once the carpet is
completely dry, vacuum thoroughly.
|
